Structural Dimensions: Width:467mm Length:767mm
£158.00 excl VAT
0 excl VAT
Add to Cart
Find your Flashing Kit.
What roof surface are the rooflights being installed into?
Slate Roof, Flat Clay Tiles,Flat Stone Tiles
Other roof surfaces (i.e. pantiles, Roman Tiles, standing seam, composite panels etc).
Do the rooflights need to be installed flush with the roof surface?
Yes, I do require a flush finish.
No, a flush rooflight installation is not required
What is the roof depth / roof build-up, as measured from the top face of the rafter to the outer surface of the tile/slate*?
Roof depth / roof build-up is less than 75mm
Roof depth / roof build-up is more than 75mm
The Roof Pitch is between 20° to 29°
The Roof Pitch is between 30° to 60°
The ‘On the Rafter’ Flashing Kits should be used to flash the rooflights.
Select No Flashing Kit Option and source own code-4 lead to flash rooflights
The ‘Between the Rafter’ Partial Flashing Kit and own lead to be used at cill for Roof Pitches of 20° to 29° should be used to flash the rooflights
The ‘Between the Rafter’ Full Flashing Kit for Roof Pitches of 30° to 60° should be used to flash the rooflights
Flashing Kits not suitable. Please call for more information on installation into alternative roof types.
Send us a Message
Request a call back
Please attach any details you have that show the rooflight requirements of your project.