Conservation Rooflight (CR15-3 ) Conservation Rooflight (CR15-3 )

Conservation Rooflight (CR15-3 )

Suitable for pitched roofs* between 17½ and 65 degrees.

the Conservation Rooflight‌ is the original low profile skylight, combining the highest modern performance standards with an authentic traditional appearance. Favoured by English Heritage, the National Trust and planning / conservation officers, it is available in a wide range of standard sizes.

Structural Dimensions: Width:1021mm Length:1635mm

Viewable Dimensions: Width:821mm Length:1435mm

  • From £1,334.00 excl VAT

Configure my Product

Don't forget a flashing Kit!

A flashing kit is a silicone collar that adds a weatherproofing back to an area around the window where tiles have had to be removed. It helps to blend the window seamlessly into the roof tiles or slates. The flashing kit you need depends on what tiles you have and how the window should feature aesthetically.

How to select your flashing kit

What roof surface are the rooflights being installed into?

Slate Roof, Flat Clay Tiles, Flat Stone Tiles

Other roof surfaces (i.e. pantiles, Roman Tiles, standing seam, composite panels etc).

Do the rooflights need to be installed flush with the roof surface?

Yes, I do require a flush finish.

No, a flush rooflight installation is not required

What is the roof depth / roof build-up, as measured from the top face of the rafter to the outer surface of the tile/slate*?

Roof depth / roof build-up is less than 75mm

Roof depth / roof build-up is more than 75mm

Do the rooflights need to be installed flush with the roof surface?

The Roof Pitch is between 17.5° to 29°

The Roof Pitch is between 30° to 65°

The ‘On the Rafter’ Flashing Kits should be used to flash the rooflights.

Select No Flashing Kit Option and source own code-4 lead to flash rooflights

The ‘Between the Rafter’ Partial Flashing Kit and own lead to be used at cill for Roof Pitches of 17.5° to 29° should be used to flash the rooflights

The ‘Between the Rafter’ Full Flashing Kit for Roof Pitches of 30° to 65° should be used to flash the rooflights

Flashing Kits not suitable. Please call for more information on installation into alternative roof types.

  • Your answers

    What roof surface are the rooflights being installed into?
  • Slate Roof, Flat Clay Tiles,Flat Stone Tiles
  • Other roof surfaces (i.e. pantiles, Roman Tiles, standing seam, composite panels etc).
  • Do the rooflights need to be installed flush with the roof surface?
  • Yes, I do require a flush finish.
  • No, a flush rooflight installation is not required
  • What is the roof depth / roof build-up, as measured from the top face of the rafter to the outer surface of the tile/slate*?
  • Roof depth is less than 75mm
  • Roof depth is more than 75mm
  • What is the pitch of the roof that the rooflights are to be installed flush into?
  • The Roof Pitch is between 17.5° to 29°
  • The Roof Pitch is between 30° to 65°

Your order

Conservation Rooflight (CR15-3 )

Structural Dimensions:
Width:1021mm Length:1635mm

Viewable Dimensions: Width:821mm Length:1435mm

  • Options Amount 0 excl VAT

  • Final Price £1,334.00 excl VAT

Conservation Rooflight (CR15-3 )

We'd love to answer your questions

Discuss your project and requirements with our in-house team of specialists today.
We would love to hear from you.

Request a Brochure FAQs